- 0
Uncategorised
Firekill offer a wide range of vertical and horizontal Bladder tank Also Foam solution AFFF3% and AFFF 6% FireKill Foam AFFF 3% is superior quality aqueous film-forming foam which can be used at the specified Concentration to extinguish fires of non – polar hydrocarbon fuels. This extinguishing agent is suitable for use with most types of proportioning and discharge equipment.
AFFF foam concentrates are designed for rapid fire Knockdown by producing a thin aqueous film which helps to prevent the release of fuel vapors.
The foam Blanket from which the film forming liquid drains separates oxygen from the fuel surface, extinguishes the fire and
Prevents re-ignition.
The water content of the foam provides a cooling effect.
The aqueous film is produced by The fluorocarbon surfactant reducing the surface tension of the foam solution to a point where the solution can be supported by the surface tension of the fuel.
FireKill Foam AFFF 3% provides excellent penetrating and wetting qualities when used on Class A fires also. This is important when extinguishing deep-seated fires in wood, paper,rubber and other ordinary combustibles.
FireKill Foam AFFF 6% is superior quality aqueous film-forming foam which can be used at the specified Concentration to extinguish fires of non – polar hydrocarbon fuels.
This extinguishing agent is suitable for use with most types of proportioning and discharge equipment. AFFF foam concentrates are designed for rapid fire Knockdown by producing a thin aqueous film which helps to prevent the release of fuel vapors.
The foam blanket from which the film forming liquid drains separates oxygen from the fuel surface, extinguishes the fire and Prevents re-ignition.
The water content of the foam provides a cooling effect. The aqueous film is produced by the fluorocarbon surfactant reducing the surface tension of the foam solution to a point where the solution can be Supported by the surface tension of the fuel. FireKill Foam AFFF 6% provides excellent penetrating and wetting Qualities when used on Class A fires also. This is important when extinguishing deep-seated fires in wood, paper, rubber and other ordinary combustibles.
Is a global company that is your one-stop resource for firefighting foam Concentrates and custom-designed foam suppression systems and Hardware. High-quality Solberg brand products deliver the performance you need, at a competitive price.
Bladder Storage Tanks
SOLBERG Bladder Tanks are the main component in a balanced pressure proportioning system, which require no outside power source other than an adequate water supply. The SOLBERG Bladder Tank is a carbon steel pressure vessel with
a nylon reinforced neoprene rubber bladder that stores the foam concentrate. During operation the foam concentrate is discharged from the tank by the water supply, collapsing the bladder around the perforated center tube until the concentrate
is depleted. SOLBERG Bladder Tanks are available in standard and pre-piped configurations, vertical and horizontal versions, and are available multiple sizes
ranging from 50 to 3300 gallons (189 - 12492 liters).
Foam System Accessory Valves
SOLBERG Swing Check Valves are available for use with most bladder tank foam systems. All valves are of stainless steel or brass construction and have NPT connections with a maximum working pressure of 200 psi (14 bars).
Water Inlet and Concentrate Isolation Control Ball Valves are used with SOLBERG foam systems hardware. Both style valves are of stainless steel construction, RTFE seats, PTFE seals and NPT threaded connections.
The SOLBERG® mini Pressure Reducing Valve (PRV) is designed to reduce
incoming water pressure to a sensible level to protect foam system components.
The PRV is constructed with a brass body, stainless steel stem and spring, Buna-N seats and diaphragm.
Hydraulic Concentrate Ball Valves
SOLBERG Hydraulic Concentrate Ball Valves come in standard sizes ranging from
1.0 in to 2.5 in (DN25- DN65) to match the concentrate inlet thread (or flange) size
on SOLBERG Proportioners and Inline Balanced Pressure Proportioner (ILBP) assemblies. Each ball valve consists of a factory assembled and tested stainless steel or bronze ball valve, stainless steel hydraulic actuator, and mounting kit attaching the actuator to the ball valve. The actuator has a position indicator for manual reset.
Our Brochure
Read It Later
Who's Online
We have 33 guests and no members online
Our Partner Suppliers
: 
O-Sense